Frequently Asked Questions
Yes, all mounting holes on the top are drilled. On the sides only the spreader bar holes are drilled.
- Are the mounting holes drilled?
- Can I use your rails for a Model A, T-bucket, or anything other than 32 and 33/34 Ford?
- What model 1932 or 33/34 car will your rails fit?
- Can I buy a boxed frame from you?
- Do you sell chassis? Do you build frames?
- Can I get a part of a frame?
- Does your frame work with X's 32/34 part?
- Can I use original parts with your frame?
- Do you sell more than the frame rails? / What component parts do you sell?
- What are the dimensions?
- How far do the 29" and 49" frame horns go?
- Do you ship to Canada and overseas?
- Can I buy just one side of the rails or boxing plates?
- How do you ship your rails?
All mounting and fender holes are drilled. We do, however, keep a few sets of rails around without the fender holes.
If you would like to buy a pair of these please specify that with your order. The price is the same.
Our rails are specifically modeled after their year but some people have been able to modify them to fit other years and
Our rails fit every model 1932 and 1933/34 Ford car. The rails are the same for roadster, coupe, sedan, pickup, etc.
We do not sell the frame boxed. We do sell the frame and boxing plates ready to be welded together. Local metal shops and national street rod companies may be able to weld them together for you.
We only sell the parts; other companies will be glad to sell you a chassis using our parts, if that is what you are looking for.
We sell the front and rear frame horns for the 1932 -- first 29" and 49" and last 48"for the 1932. See 1932 Prices. We also sell the first 49" and the last 48" for the 1933-34. See our 1933-34 Prices for more information.
Our frame is built exactly to the original 32 and 33-34 Ford specifications, so it will work perfectly with all original 32 and 33-34 parts as well as any parts that follow the original specifications.
Yes, our frame is designed specifically around the original frame so all original parts will work with it.
Besides the frame rails we sell spreader bars, front crossmembers, center crossmembers, rear crossmembers, boxing plates, and blueprints. We do not sell mounting brackets, axles, or anything else beyond the previous list. See our 1932 Prices or 1933-34 Prices for more information.
We sell blueprints which have the exact dimensions for all mounting and fender holes. See our 1932 Prices or 1933-34 Prices for more information.
On the 32 the 29" frame horns go a few inches past the front crossmember and the 49" frame horns go slightly into the reveal.
Unfortunately, we do not ship directly to Canada and overseas to Australia, Europe, etc. However we will gladly ship to any exporter located in the United States, for example we have shipped to container shipping companies in Los Angeles and New York before. We can ship on fumigated (heat-treated) pallets for Australia or other countries that may require it. Additionally, as the customer you can always schedule a pickup at our location -- we are right outside of Memphis, TN, which means nearly every major shipping company has a depot or terminal near us.
Yes, that is not a problem. Just halve the price on the price sheet and we will glady send you the side you need, either of the frame rails or the boxing plates.
We ship our rails truckfreight on a custom pallet that is 2ft wide and 8ft long, so the front part of the rails hang off the end and the pallet can be easily moved by forklift. We use several major trucklines. We ship freight collect, so you pay for the shipping cost when it arrives, though you will get our freight discount for the shipment. If you have your own freight discounts you can also just schedule a pickup from our location. Being right outside of Memphis, TN, we are in the pickup area of every major shipping company.
If you have any other questions, please call us at 662-895-5300, fax us at 662-895-5320, or email us at firstname.lastname@example.org